How to Measure Interior Doors | SoCal Millworks

SOCAL MILLWORKS • MEASURING GUIDE

How to Measure for Interior Doors

Five simple steps to prepare accurate information for your door quote.

Start by identifying whether you are measuring an existing door slab, a visible frame opening, or exposed rough framing. These measurements are different and should be recorded separately.

Step 1: Choose your door type

SoCal Millworks illustrated step 1: Choose your door type

Decide whether you need a slab only or a prehung unit. A slab is the door panel; a prehung unit includes the door mounted in a frame. For slab replacements, hinge and latch locations must also match.

Step 2: Measure width and height

SoCal Millworks illustrated step 2: Measure width and height

Measure the slab width at the top, middle and bottom, and its height on both sides. Record slab thickness. If framing is exposed, measure the rough opening separately at several locations. Never treat a visible trim opening as a verified rough opening.

Step 3: Measure jamb depth

Interior door jamb with a black strike plate and yellow tape measure across the jamb depth.
Interior jamb depth: measure across the full jamb, excluding casing. Record your own measurement. Tap to enlarge.

Open the door and measure straight across the full depth of one side jamb, from the jamb edge just before the casing on one side to the jamb edge just before the casing on the other. Exclude the casing thickness and include the full span across the doorstop. Check near the top, middle and bottom. If trim hides an endpoint, send a photo so we can confirm it. Common nominal depths include 4-9/16 and 6-9/16 inches; your actual measurement may differ.

Step 4: Confirm the door swing

Open the door and stand in the doorway with your back against the hinge-side jamb, facing the opposite jamb. If the door opens to your right, it is right-hand (RH). If it opens to your left, it is left-hand (LH).

Next, name the room: a door that opens into that room is inswing; a door that opens out of that room is outswing. Record both details, for example: “Bedroom — RH inswing.”

Wide photos demonstrate LH and RH door handing with a person against the hinge jamb and floor arrows, above separate inswing and outswing diagrams.

Tap the graphic to enlarge. Send photos from both sides and name the room so SoCal Millworks can confirm the handing and swing before ordering.

Step 5: Take photos for your quote

  • The full door and frame from both sides.
  • A close-up of the hinges and latch.
  • The tape across the jamb depth, with both endpoints visible. See Step 3 above.
  • The casing, floor clearance and any product labels.

Send a full-door photo from each side plus close-ups of the hinges, latch, jamb, trim, flooring and any labels. Tell us which dimensions you could not verify.

Print Your Door Measuring Form

Finished the five steps? Print this sheet and record your measurements for a quote.

Print / Download Measuring Form (PDF)

Watch: How to measure for interior doors

How to measure for interior doors — video by Masonite. Press play to watch here.

Ready for a quote?

Send your door style, quantity, labeled measurements, and photos. We can help you confirm product specifications before ordering.

Call (951) 393-0333Text PhotosEmail for a Quote

840 E Parkridge Ave, Suite 108, Corona, CA 92879

This guide helps prepare a quote; it is not an installation specification. Final product dimensions, rough opening, floor clearance, handing, and modification limits must be verified for the selected unit and actual site conditions. Fire-rated assemblies require product-specific review.

Ready to Install Your New Door?

Once you have your measurements, follow our step-by-step guide for replacing an interior slab or installing a prehung door.

View the Interior Door Installation Guide